Axiohm APOS PRINTER SERIES Instrukcja Użytkownika Pobierz pdf (Strona 107)

APOS Premium Printer Series User Manual Page 106 /136 Reference: FDE 3107312 Issue A

ET RELATIVE VERTICAL PRINT POSITION IN PAGE MODE

Sets the relative vertical print starting position from the current position.

This command can also change the horizontal and vertical motion unit.

The unit of horizontal and vertical motion is specified by this command.

This command functions as follows, depending on the print starting position set by Select Print Direction in

Page Mode (ESC T):

1. When the starting position is set to the upper left or lower right of the printing area, the vertical motion unit (y) is

used.

2. When the starting position is set to the upper right or lower left of the printing area, the horizontal motion unit

(x) is used.

ASCII

GS \ nL nH

Hexadecimal 1D 5C nL nH

Decimal

29 92 nL nH

Value

The value for the horizontal and vertical movement cannot be less than the minimum horizontal movement

amount, and, must be in even units of the minimum horizontal movement amount.

Formulas

The distance from the current position is set to [(nL + nH x 256) x vertical or horizontal motion unit]

inches.

For downward movement, pitch n is specified as: n = nL + nH x 256

For upward movement, (nL + nH x 256) is

negative and pitch n is specified as:

n = 65536 – (nL + nH x 256)

Exceptions

This command is used only in page mode, otherwise it is ignored.

Any setting that exceeds the specified printing area is ignored.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 137 138

Brak uwag

Axiohm APOS PRINTER SERIES Instrukcja Użytkownika Strona 107